2020年7月10日 (金)

Application of Multi Master Station Power Management Controller HMC6 in "Guangxiao 05" Ship

 

Three 175KW gensets are in the network, the load percentage is less than 30%, and the No.3 genset with low splitting priority is in the network

Recently, the power station of "Guangxiao 05" catamaran fire-fighting boat built by JiangLong Ship Building on the coast of the South China Sea has successfully passed the CCS acceptance. The successful acceptance of the automatic power station marks that the ship is one step closer to the mooring navigation test. The on-site commissioning personnel of Zhongzhi technology company will witness this exciting momentstogether with the project management personnel of JiangLong Ship Building, the manufacturer of main switchboard and the manufacturer of main genset.

1_20200710165401

Guangxiao 05 in Berthing State

The power management system is built by three multi master power management controllers HMC6 and its auxiliary expansion modules on the main distribution board. The system is set in manual and automatic modes, and the startup sequence can be adjusted arbitrarily. In automatic mode, three main gensets can be automatically synchronized and combined according to the priority, and can be automatically adjusted in frequency and load during parallel operation to quickly complete the balanced distribution of active power. When the genset is running with heavy load, the online genset will be increased, and when the load is light, the online genset will be reduced. When the online genset fails, the standby genset will start automatically and automatically start, and the failed genset will automatically exit. When a single genset fails and loses power, the standby main genset can start on its own and close within 30 seconds for power supply. The system can also automatically close and disconnect the disconnector between the busbar A and busbar B. The high-power side thruster has the function of heavy load inquiry, and the system has the function of automatically unloading the non-important load when the parallel operation of the main genset is overloaded.

2_20200710165401

HMC6 Main Operation Interface

3_20200710165401

Multi Genset Interface: Three GensetsWorking in the Split Mode

4_20200710165401

Load Interface of No.3 Main Genset

5_20200710165401

Test for Main Distribution Board Site 1

6_20200710165401

Test for Main Distribution Board Site 2

With the help of HMC6 power management controller's built-in power management strategy and rich adjustable parameters, users can quickly realize the balanced distribution of active power and load distribution precision under the harsh conditions of any combination of three units, such as extremely fast synchronous parallel operation, different load percentage, sudden load increase and sudden discharge, etc. by modifying a small number of core parameters in a short time within 3%.

Introduction of the Core Functions of Multi Master Power Management Controller HMC6

 

7_20200710165401

Power Management Solution of HMC6 with HMC9000 Diesel Engine Control Box

The system builds a real multi master station system through MSC communication network (CAN bus), and its power management function is realized by the calculation of all generator control units. In the system, a control unit is selected as the "instruction unit", which is responsible for the calculation of the starting priority and other related power management functions of the genset. It can realize automatic synchronization and load distribution of up to 16 gensets. If one control unit fails, the power management calculation will be automatically transferred to the next available control unit.

Major Function

81_20200710165401

www.smartgen.cn

9_20200710165401

2020年7月 1日 (水)

WOODWARD easYgen-2000 Series Parallel / Grid Connected Controller

0_20200701173201
WOODWARD easYgen-2000 series controller is a kind of parallel controller with simple operation, rich functions and high reliability. It can be used for 16 same or different gensets islanding parallel operation or one genset in grid connected operation with mains. The automatic start and stop control logic of the controller can realize more control requirements according to different needs, and optimize the fuel efficiency of multiple units at the same time.

easYgen-2000 series controllers have rich interfaces: CANopen for load sharing, J1939 for engine ECU, RS485 for PLC, HMI and SCADA. Users can choose the appropriate controller according to different requirements.

The analog input interface easYgen-2000 series controller can directly use 0-20mA or 0-2000Ω type sensors without additional equipment.

The analog output of easYgen-2000 series controller can be used for speed regulation and voltage regulation of genset. It has current type, voltage type and PWM signal, which can be selected by controller software without additional conversion equipment.

easYgen-2000 series controller can expand I/O module through CAN interface to add more I/O interfaces, and support the third-party I/O expansion module.

easYgen-2000 series controller is available in 11 languages including English, German, French, Spanish, Chinese, Japanese, Italian, Portuguese, Turkish, Russian and Polish.

easYgen-2000 series controllers have different start and stop logics for diesel and gas engines, which are suitable for various types of engines.

easYgen-2000 series controller event log can record 300 alarms and operation events according to the first in and first out principle for customers to check.

easYgen-2000 series controller interface application:

1_20200701173201

 

easYgen-2000 series single-unit grid connected application:

2_20200701173201

 

easYgen-2000 series single-unit and grid connected application:

3_20200701173201

 

easYgen-2000 series controller alarm level, and most of the alarm input can be programmed to meet the needs of different alarm actions of customers.

4_20200701173201

www.smartgen.cn

5_20200701173201

2020年6月24日 (水)

The Dragon Boat Festival

 

The Dragon Boat Festival:
From June 25 to 27

1_20200624202201

www.smartgen.cn

3_20200624202201

2020年6月20日 (土)

Let's applause for the person who has obtained the certificate

1_20200620182401


Glad Tidings!

The review of the engineering professional title of 2019 has been successfully concluded. 20 people of SmartGen have passed the review of professional titles, including 17 with intermediate professional titles and 3 with senior professional titles. The number of people who passed the annual professional title review reached a record high.

Here, Let's congratulate those colleagues who have obtained the certificate.

2_20200620182401


Building hundred years SmartGen requires us to hold on your faith and give it your all.

The company will continue to put more efforts on the construction of professional and technical personnel, guide the career development of employees, and accelerate the development of enterprise.

www.smartgen.cn

3_20200620182401

2020年6月19日 (金)

A light in Devil City

                                                                   --The application of parallel controller: HGM9510+HGM9580

Xinjiang is the largest province of China and there is a city called "Karamay", which is the only city named after oil in the world, "Karamay" means "black oil" in Uygur language. Wuerhe Wind City in Wuerhe district of Karamay is known for "Devil City" as a national 4A scenic spot.

1_20200619175601

Devil City is located in the lower reaches of Jiamu River in Junggar Basin, Xinjiang province. It is a natural wind-eroded Yadan landform, and the Gobi Desert presents various earth mounds, where the soil is barren and surrounding is dead silent. when strong northwest wind passes through the jagged and uneven mounds, the sand flies away from the rocks makes the sky dark, and the cyclones whirl through among the jagged rocks, giving out a mournful sound and howling. On a moonlit night, the situation is particularly terrible.

2_20200619175601

In this vast Gobi Desert, in addition to the magic natural landscape Devil City, there are many modern civilizations. Drilling machines are scattered in straight wide roads everywhere, as well as the natural gas power stations. In the endless Gobi Desert, natural gas reserves are quite abundant. With such favorable advantage, gas power generation emerges at the moment. Next, we will introduce a perfect project application of gas power station.

The power station has 26 gas generators to provide power for the gas processing station. The control system adopts SmartGen HGM9510 multi-unit parallel controller and HGM9580 bus controller. This project consists of 3 groups of HGM9510 controllers (the first group is 8 controllers, the second group is 8 controllers, the third group is 10 controllers) to control the closing/opening of power generation bus and step-up transformer by HGM9580, finally to control high voltage bus parallel of HGM9580.There are multiple logical protections built in HGM9580, realizing 3-level network and 3 systems parallel by CAN bus, as well as multiple low voltage and high voltage load power supplies, automatic synchronization, load sharing, on-demand on/off, abnormal protection and other functions.

3_20200619175601

Gas Power Station Solution

4_20200619175601

Gas Power Station on-site 1

5_20200619175601

Gas Power Station on-site 2

6_20200619175601

HGM9510 Multi-unit Parallel

7_20200619175601

HGM9580 Step-up Transformer

8_20200619175601

HGM9580 High Voltage 10kV Parallel

When sunset and dim night comes, you could still hear the roar of machines and see the sparks in the vast Gobi Desert. That is the dazzling light provided by the products of SmartGen for the long night in the Gobi Desert.

www.smartgen.cn

9_20200619175601

 

2020年6月12日 (金)

Marine Generator Control Module Brings Good News——HLS300A

0_20200612171101
HLS300A Power Share Module is a piece of upgraded product of HLS300. Combined with the application scenarios and functional requirements of the marine generator control module market, HLS300A further improves the product's usability and power sharing accuracy. Through the connection of panel key or USB interface and PC terminal, the relevant parameters of power share module can be set and adjusted precisely. LCD and LED can display a variety of electrical parameters and working status of the module intuitively. In combination with HSM300 and HEP300 electronic potentiometer, the functions of synchronous parallel and power sharing can be realized in manual and automatic mode.

The main functions are compared as follows

1en

 

Main characters

Suitable for 3-phase 3-wire, single-phase 2-wire power supply 50Hz, 60Hz system.
LCD with backlight.
Range of power supply DC(8~35)V.
AC voltage input: AC50V~AC620V(ph-ph).

2_20200612171301

Panel key or setting parameters via USB

 

3en

Application of synchronization + power share module (switching value regulates speed)

 

4en

Synchronization + power share module + electronic potentiometer application (analog quantity regulates rotation rate)

 

Application cases

A cable-laying ship:
With 3 400kW main gensets and 1 120kW berthing gensets.
Use four HLS300+ one HSM300.

5_20200612171401

51_20200612171401

HSM300 and HLS300 synchronization and load distribution modules have been widely used in marine power distribution, multi machine parallel connection of land-based generator units, grid connection of generator units and other occasions. As an enhanced power sharing module, HLS300A has further optimized product function, performance and operation convenience.

HLS300A can further shorten your debugging cycle, improve efficiency and make control easier!

www.smartgen.cn

6_20200612171401

 

2020年6月 5日 (金)

Seamless connection and best combination

                                                                                             ——New generation ATS control module

1_20200605164701

As the core part of ATSE, ATS control module plays an essential role and its stable performance also determines the reliability of the whole ATSE. As a split control module, wiring is an indispensable process. For switch factories and complete sets of factories, wiring should be as simple as possible, which not only saves labor costs but also improves production efficiency.

2_20200605164701

In order to better cooperate with manufacturers and solve the problems of difficult wiring, SmartGen launched a new generation of electromagnetic ATS specialized control module HAT552/553.The new generation of products not only solve the wiring problem, but also optimize the hardware and software, making the products more professional and catering to the using habits of customers.

3_20200605164701

The product is specially designed for electromagnetic switch, the connection between control module and switch is one-to-one, which is suitable for switch of Feiteng, HanKwang, Xia Kong and other brands.

Product hardware optimization
1、Closed/open AC220V active output and direct control switch;
2、Closing state feedback passive input, active short connection;
3、Standard RS485 interface can realize “three-remote” functions;
4、Standard D-type USB interface for convenient parameter configuration;
5、Single line LED indicates power supply state and switching state.

Product software optimization
1、PT setting can be used to set the voltage transformer variation ratio;
2、Display the accumulated closing times of A power supply /B power supply;
3、Display the current continuous power supply time and the accumulated power supply time of A power supply /B power supply;
4、The screen displays the power type (mains power or power generation, the ICONS of mains power and power generation can be changed according to the setting), power state, switch closing state.

4e_20200605164701

Two-stage Switch Wiring Diagram

5e_20200605164701

Three-stage Switch Wiring Diagram

Is it simple when you see the wiring diagram? Yes, the control module and ATS switch are connected seamlessly, it is HAT552/553 that the best combination of electromagnetic ATS.

www.smartgen.cn

6_20200605164701

2020年5月29日 (金)

Let's meet wonderful things in innovation and initiative!

                                                             —— "TRIZ Technology Innovation Method Training" of SmartGen

Muller says: now all good things are the result of innovation.
It's innovation that makes us from "Made in china" to "Intelligently made in China".
It's innovation that makes control easier and makes the future better.
After learning basic theory about innovative methods from April 9th to 11th, we invited Zhao Yang, the expert from the International TRIZ Association and the dean of Henan Vocational College of Applied Technology to show us the charm of innovation from May 22 to 23.

1_20200529150201

From 40 invention principles to the eight evolutionary rules of TRIZ's technology system, from the three obstacles of technological innovation to the six frequently used methods of thinking innovation, from 39 engineering parameters to the contradiction matrix, from the physical contradiction to the four separation principles, and we found solutions for resource analysis, functional analysis, object model, etc. Teacher Zhao used a vivid image of work and life scenes to make everyone understand the TRIZ technology innovation method. And we adopted group simulation exercises to let everyone learn how to apply the TRIZ technology innovation method to solve practical problems in the work, how to constantly promote independent innovation, especially original innovation ability to constantly build the international competitiveness of products.

2_20200529150201

21_20200529150201 22_20200529150201 23 

SmartGen will continue to follow the mission of "Make control easier", develop in innovation, grow up with employees in learning, and achieve win-win outcomes with users in cooperation!

www.smartgen.cn

3_20200529150201

2020年5月28日 (木)

Profess to you: having you all over the trials of a long journey will go well

Vehicles are playing important roles in our life. In addition to the cars and SUVs used for commuting or transportation, there is another sort of traffic vehicles that are bound up with our life, they are various of engineering vehicles! Such as mechanical engineering vehicles, electrical engineering vehicles and so on.

1_20200528193701

Some of them look like this

There are all kinds of precise instruments or dashboards to control the engine and vehicles of our private cars. Do you know how to realize the accurate control and safe running of the engineering vehicles with heavy work and arduous journey?

Today we will introduce the HEM8500 of SmartGen to you, a useful control module for different engineering vehicles!

2_20200528193901

HEM8500 engine CAN monitoring module is an intelligent instrument and control equipment integrating microelectronics, electric measurement, digital and analog mixed signal processing, CAN communication, vehicle control and engine electronic control technologies. Its high integration with CAN gateway function, completely replacing the Murphy display, is the ideal product for the engineering vehicle CAN communication and electrical control.

3_20200528193901

The features of HEM8500 are as follows:

1、3-inch LCD with "Chinese/English, easy to operate;
2、Powerful functions of two CANBUS interfaces and one RS485 interface;
3、Engine diagnosis switch, easy to check the fault alarm information;
4、Hand throttle switch to facilitate manual adjustment of speed;
5、The front panel emergency stop button can control the engine stop;
6、Real time calendar, clock, event log and running time record function;
7、99 shutdown alarms records can be saved circularly and be checked on site;
8、Crank statistics and maintenance time reminder functions;
9、(Note time, fuel consumption, average fuel consumption) reset button;
10、Wide power supply range DC (10~35) V, which can adapt to different starting battery voltage environments;
11、Wear-resistant and scratch resistant, with strong ability to adapt to high and low temperature environments, and its protective performance can reach IP65......

4_20200528193901

At the same time, compared with the previous generation HEM8400, HEM8500 has a 4-20mA analog signal output and 2 4-20mA analog signal inputs, which can be connected to the tachometer or torque meter. HEM8500 is wired by connectors, which is more stable and reliable.

5_20200528193901

Are you shocked and impressed by the powerful functions of the HEM8500?

In addition, the HEM8500 is widely used in engineering machinery, special vehicles and other engine-driven engineering equipment, covering mines, roads, bridges, petroleum and so on. It is obviously the functions and performances of HEM8500 are powerful.

How could you not show your affection for such a good product full of technology and practicality? For all kinds of mechanical engineering vehicles and engineering equipment, Having HEM8500 all over the trials of a long journey will go well.

6_20200528193901

HEM8500, you're worth it!

www.smartgen.cn

7_20200528193901

2020年5月23日 (土)

The Lean Improvement Project Competition Of SmartGen (Third Phase)

                                                                                             ---Continuous improvement without limits.

The pleasant scenery in May shows her pretty.

The lean improvement system of SmartGen also vigorously blooms her vitality.

"The Lean Improvement Project Competition of SmartGen (Third Phase)" was held in the training room on the afternoon of May 20th.

1_20200523201501

There were 12 events in this competition. It has significantly improved in depth and breadth compared with the previous two phases. All five elements of management objectives ( Quality, Costing, Deadline, Safety, Morale ) were involved, and the content was brilliant.

In view of the bottleneck of PCB sample patch efficiency in the process of sample trial production, the R & D center perfectly combined the new process, new technology and new equipment to increase the sample welding efficiency by 75%. According to the characteristics of the customized products, the production center responded to the rapid manufacturing needs of such products through the "flexible production line", and also ensured the mass production efficiency of conventional products.

Other departments were even brave and rushed to the front. The judges marveled at everyone's wisdom and admired at everyone's diligence.

General manager Cui Wenfeng and directors of each center participated as judges during the process. After the presentation, the judges made wonderful and pertinent comments, and selected top three from competitors. Wow, Mr.Cui issued certificates of honor to the winners! Wow, there also came the red packets~~

2_20200523201501

21_20200523201501

The progress of lean improvement not only injects new vitality into the company's development, but also provides a bigger stage for employees growth. I believe that the lean improvement of SmartGen will be better and better, let's look forward to a more exciting moment next time!

3_20200523201601

www.smartgen.cn

4_20200523201601

«Communication & Power Modules Making Control Easier

無料ブログはココログ