« 2020年12月 | トップページ | 2021年2月 »

2021年1月28日 (木)

SmartGen | New HGM6100N(4G) Series Will Launch

Somebody imitates my front panel

1_20210128020201 

Somebody imitates my back pane

2_20210128020301

Familiar figure, adding a new function, makes your controller more powerful and smarter

3_20210128020301

Cloud monitoring all-in-one HGM6100N(4G) series controller will be launched sooner

6e_20210128022201
Easier for unit successfully connects with cloud server
Insert card---scan the code to register---unit in hand
Cost-effective
It is closer to our expectations for the controller
The classic reproduces the legend
Add cloud modem expansion board based on the HGM6100N series

The comparison of 4 models is as follows:

6e_20210128022201

Product Highlights:
Cloud monitoring all-in-one design, supports SMS function.
Configure controller parameters via cloud server.
LCD display GPS position and cloud monitoring networking status.
For different countries and regions, different models of 4G expansion module are available.
Charging voltage, speed, water temperature, oil pressure display can select ECU or external analog sampling.
Compatible with various ECU engine communication (only available for CAN-4G model controllers).

www.smartgen.cn

7_20210128022201

2021年1月21日 (木)

SmartGen | Dual Power ATS Controller—HAT553V

1e_20210121072101 1e_20210121072101

Product highlights:

Wide working temperature range (-40°C~+70°C), suitable for high altitude, alpine regions;
Suitable for non-breaking, one-breaking and two-breaking switches;
With RS422 isolated communication port, can choose RS422 or RS485 communication, applies ModBus-RTU communication protocol;
132x64 LCD with backlight, optional Chinese and English display;
DC9-35V continuous power supply, with DC reverse connection protection function;
Two-way DC power input (DC power redundancy design);
With real-time clock, event log (50 pieces), scheduled start function;
Suitable for 3-phase 4-wire, single phase 2-wire, 2-phase 3-wire;
Personalized design and simple wiring;
D-type USB port;
IP65 protection level.

Controller Rear Panel

2_20210121072201

Typical Wiring Diagram

31e_20210121072201

SGQ-N/T Application Diagram

32e

Breaker (ACB) Application Diagram

 

Overall Dimensions and Cutout

4e_20210121072401

www.smartgen.cn

7_20210121072301

2021年1月14日 (木)

SmartGen | Make Great Success with Small Controller

——Application of construction machinery product HEM4100


Rotary drilling rig, belonging to construction machinery, is a special construction machinery for bored pile drilling operation. It is widely used in municipal construction, highway and railroad bridges, high-rise buildings and other foundation construction. With different drill bits, it is suitable for drilling in various geologies such as clay, silt, sand, mucky soil, artificial backfill and stratum containing some pebbles and gravels, and can be adapted to the construction of weathered rock layers.

At present, the construction machinery engine is in the stage of updating the national Ⅱto nationalⅢemission standards. In this case, the nationalⅡengine is replaced by nationalⅢengine. SmartGen’s construction machinery product HEM4100 controller is used for transformation. The rotary drilling rig uses ECU engine as the power source. This case applies CAN J1939 of HEM4100 to communicate with engine ECU and achieves start and stop of HEM4100 through its start and stop button. The throttle (i.e. speed) is flexibly controlled by the throttle pedal device, and the engine speed, battery voltage, oil pressure and engine temperature are monitored in real time by HEM4100 to achieve normal operation of the rotary drilling rig.

 

Site Pictures

1_20210114041401

HEM4100 Wire Connection

2_20210114041401

HEM4100 Panel

3_20210114041401

Throttle Pedal

4_20210114041401

Rotary Drilling Rig Engine

5_20210114041401

Rotary Drilling Rig

6_20210114041401

HEM4100 Front Panel

HEM4100 main functions:

  • Support relay, CAN BUS speed adjustment.
    USB, RS485 communication ports.
    6-way analog suit for multi-type sensors.
    Event log, maintenance reminder.
    Applies to engine control systems like water pump, beacon, air compressor, construction machinery and so on.

 

www.smartgen.cn

7_20210114041401

2021年1月 9日 (土)

SmartGen | Panning Sand Requires You

Application of HMC9000S+AIN16-C+AIN16-PT+HRM3300

About 30 nautical miles away from a costal port in the beautiful Zhanjiang city, Guangdong Province, there was a huge ship of nearly 10,000 tons sand pumping ship. The two 12-cyclinder water pump engines are controlled by HMC9000S, and the 12 cylinder temperatures of the engines are detected by the expanded analog input module AIN16-PT. The temperature of 8 shafts is detected by the expanded analog input module AIN16-C, and the shaft temperature signal is converted from PT100 to 4~20mA current type signal through the temperature transmitter to the AIN16-C. The AIN16-C then transmits it to the diesel engine controller HMC9000S through CANBUS (EXPANSION) communication, and finally displays the real-time temperature and protection of the shaft. HMC9000S transmits the engine information to the remote control module HRM3300 in cab through CANBUS (REMOTE) communication, and can also control engine start/stop remotely through HRM3300.

Project Control System Introduction

HMC9000S engine controller: can be widely used in marine emergency units, main propulsion units, DG units or water pump units. Its remote monitoring module interface enables remote monitoring, which can remotely control engine start, stop, etc.

Hmc9000af

HMC9000S

Ain16ptf

AIN16-PT Analog Input Module---16-way PT100 Sensor Input Module

Ain16cf

AIN16-C Analog Input Module---16-way 4~20 mA Sensor Input Module

Hrm3300f

HRM3300 remote control module suits for the remote monitoring of HMC9000S engine controller

Photo_20210109032901

Typical Application of Marine Controller Communication

 

Site Pictures

6_20210109032901

Sand Pumping Ship

7_20210109032901

HRM3300 in Cab

8_20210109032901

Staff Operating HRM3300

9_20210109032901

Water Pump Engine

10_20210109032901

Water Pump Engine Cylinder Temperature

11_20210109032901

Water Pump Engine Main Shaft Temperature

12_20210109032901

PT100 to 4~20mA Temperature Transmitter

13_20210109032901

HMC9000S engine partial parameters

 

Common Fault Analysis:

1. HMC9000S and AIN16 communication failure:

Fault cause:
CAN H and CAN L of CANBUS (EXPANSION) communication are reversed;
CANBUS (EXPANSION) communication did not short circuit the CAN L and 120 Ω matching resistor on the controller;
If the distance of CANBUS (EXPANSION) communication line is too long, SGCAN300 relay conversion module (MSC or RS485 communication to optical fiber) should be added.

2. Inaccurate display of temperature or pressure sensor:

Fault cause:
Sensor curve setting is wrong;
Sensor is broken.

3. HMC9000S and HRM3300 communication failure:

Fault cause:
CAN H and CAN L of CANBUS (REMOTE) communication are reversed;
CANBUS (REMOTE) communication did not short circuit the CAN L and 120 Ω matching resistor on the controller;
If the distance of CANBUS (REMOTE) communication line is too long, SGCAN300 relay conversion module (MSC or RS485 communication to optical fiber) should be added.

www.smartgen.cn

16_20210109032901

« 2020年12月 | トップページ | 2021年2月 »

無料ブログはココログ